This tracker is under development. Confirm anything here against the primary source before relying on it for your sustainability activities.

Report an issue →
UY-EPRIn force; Ley 19.829 sets EPR for special waste; battery rules replaced by Decreto 227/025

Ley Nº 19.829 de Gestión Integral de Residuos (18 September 2019); Ley General de Protección del Ambiente Nº 17.283 (28 November 2000); Ley Nº 17.849 (Uso de Envases No Retornables, 29 November 2004); Decreto Nº 260/007 (Plan de Envases); Decreto Nº 227/025 (batteries, replacing Decreto 373/003); Decreto Nº 358/015 (tyres); lubricant rules

Uruguay · Ministerio de Ambiente (formerly MVOTMA); Intendencias departamentales co-manage collection

Uruguay's Ley 19.829 (2019) sets extended producer responsibility for manufacturers and importers of special waste, alongside Ley 17.849 on non-returnable packaging and Decreto 260/007, which set up the Plan de Envases run by the Cámara de Industrias. Decreto 227/025 replaced the 2003 battery decree and requires manufacturers and importers of batteries over 1 kW to register and implement a master management plan approved by the Ministerio de Ambiente. Separate decrees cover tyres and lubricant containers.

Category
Extended Producer Responsibility
Enforcement
Mandatory
Effective date
Ley 17.283 in force 2000; Ley 17.849 in force 2004; Decreto 260/007 in force 2007; Ley 19.829 published 30 September 2019; Decreto 358/015 published 8 January 2016; Decreto 227/025 published 5 November 2025 and in force the next day
Covered entities
Manufacturers and importers of products that become special waste under Ley 19.829 (except products taxed under the specific internal tax); brand owners and importers of non-returnable packaging (Ley 17.849, Decreto 260/007); manufacturers, importers and special users of batteries over 1 kW used in land, sea or air vehicles and agricultural machinery (Decreto 227/025); tyre producers and importers (Decreto 358/015); lubricant producers and importers
Notes
Ley 19.829 Art. 41 sets EPR for special waste; Art. 44 requires packaging minimization and lets the Executive restrict materials or cap packaging weight and volume. Decreto 227/025 gives producers of batteries other than lead-acid one year from publication to register. Ministerio de Ambiente created in 2020, absorbing MVOTMA's environment competences.

Sources

Related regulations

In force; PPWR has applied since 12 August 2026 and replaced Directive 94/62/EC; ELV Regulation (EU) 2026/1738 in force since 13 August 2026 and applies from 1 September 2028

The EU runs product-specific EPR regimes for packaging, electrical and electronic equipment, batteries, vehicles and single-use plastics, putting collection, recycling and recycled-content obligations on producers placing goods on the single market. The Packaging Regulation has applied directly in all Member States since 12 August 2026, with recyclability, reuse and recycled-content rules phasing in. The new End-of-Life Vehicles Regulation sets vehicle design, recycled-content and EPR rules from 1 September 2028.

Enforcement
Mandatory
Effective date
PPWR entered into force 11 February 2025 and has applied since 12 August 2026 (Article 67(5) from 12 February 2029; other obligations phase in later). Battery Regulation entered into force 17 August 2023 with phased obligations through 2027. ELV Regulation (EU) 2026/1738 entered into force 13 August 2026 and applies from 1 September 2028, when Directive 2000/53/EC is repealed (some Directive provisions continue until 2032). WEEE Directive in force since 2012; SUP Directive transposition deadline 3 July 2021.
Covered entities
Producers, importers and distributors placing packaging, EEE, batteries, vehicles or single-use plastic products on the EU market, regardless of material or origin
Primary source ↗Verified 2026-09-23
In force; year 1 (2025-26) fees invoiced from October 2025; confirmed year 2 (2026-27) fees and notices of liability due later in 2026

The UK runs separate producer responsibility regimes for packaging, electrical equipment, batteries and end-of-life vehicles. Under the 2024 pEPR rules, large packaging producers pay PackUK disposal fees that cover the cost of managing household packaging waste, and from year 2 (2026-27) those fees vary with recyclability. Producers still meet recycling obligations by obtaining packaging recycling notes (PRNs and PERNs).

Enforcement
Mandatory
Effective date
pEPR Regulations made 11 December 2024, in force 1 January 2025; first assessment year 2025-26 (first notices of liability October 2025, based on 2024 packaging data); confirmed year 2 (2026-27) fees due later in 2026; WEEE Regs since 1 January 2014; Battery Regs since 5 May 2009
Covered entities
Packaging producers established in the UK with annual turnover of GBP 1 million or more that supplied or imported more than 25 tonnes of packaging in the previous year. Large producers (turnover above GBP 2 million and more than 50 tonnes) pay household packaging disposal fees and must meet recycling obligations with PRNs or PERNs; small producers have fewer duties. WEEE producers placing EEE on the UK market; battery and ELV producers.
Primary source ↗Verified 2026-09-23
In force; VREG amended 2022 to extend scope to all EEE. VVEA amendments in force 1 August 2026. New Packaging Ordinance (VerpV) adopted 24 June 2026, in force 1 January 2027 with phased duties to 2032.

Switzerland operates advance disposal fee (vRG) schemes for electrical and electronic equipment, batteries, glass bottles and PET, run by industry organizations (SENS, SWICO, Inobat, PET-Recycling Schweiz) under federal ordinances. The Packaging Ordinance adopted in June 2026 replaces the beverage container rules: packaging must be minimized, suitable for recycling and use recycled content where feasible (from 2030); sellers of beverage cartons and single-use plastic packaging above the thresholds must take them back unless they finance an industry scheme (from 2031); and recycling rates of at least 70% for beverage cartons and 55% for single-use plastic packaging apply from 2032, with possible mandatory deposits if missed. Until then, collection of plastic packaging remains largely industry-led and voluntary.

Enforcement
Mandatory
Effective date
VREG in force since 1 July 1998, revised scope effective 1 January 2022; VVEA effective 1 January 2016, amended 1 August 2026; VerpV in force 1 January 2027, with advance disposal fee for glass packaging (Art. 8) from 1 January 2028, general packaging requirements (Art. 3) from 1 January 2030, subsidiary take-back duty for beverage cartons and single-use plastic packaging (Art. 4) from 1 January 2031, and minimum recycling rates (Art. 7) from 1 January 2032; battery and glass advance disposal fees in place since the 1990s
Covered entities
Manufacturers, importers and retailers of electrical and electronic equipment, batteries, glass and PET beverage containers placing products on the Swiss market. Under the VerpV: manufacturers and importers of glass packaging (extended beyond beverage containers from 2028); retailers and manufacturers placing filled beverage cartons or single-use plastic packaging on the market that exceed CHF 1 million turnover and 500 kg of packaging in two consecutive years (take-back duty from 2031 unless met through an industry organization); all retailers and manufacturers supplying filled packaging (design requirements from 2030).
Primary source ↗Verified 2026-09-23
In force; revised packaging EPR rules applied from 1 July 2025; EPR for certain single-use plastic products (Chapter 7A) added in November 2025 and for plastic-containing fishing and aquaculture gear (Chapter 7B) from 1 January 2026. A new packaging regulation implementing the EU PPWR has been proposed to the ministry but is not yet out for consultation.

Norway implements EU-style EPR through Avfallsforskriften, requiring producers of packaging, EEE, batteries and vehicles to join a producer responsibility organization approved by the Environment Agency. Since July 2025 the previous 1,000 kg-per-material exemption for packaging has been abolished, so every importer or producer must register and report. Chapter 7A requires producers of certain single-use plastic products to join an approved scheme and cover municipal cleanup and collection costs from 2027, and Chapter 7B sets EPR for plastic-containing fishing and aquaculture gear.

Enforcement
Mandatory
Effective date
Avfallsforskriften in force since 2004 (latest amendment FOR-2025-12-18-2839, in force 1 January 2026); Chapter 7 packaging EPR revised effective 1 July 2025 (lower registration limit removed); Chapter 7A in force on adoption (FOR-2025-11-12-2278), with the duty to cover municipal costs applying to costs from 1 January 2027 and first payment due 1 October 2028; Chapter 7B in force 1 January 2026, with §§ 7B-4 to 7B-7 applying from 1 March 2027; WEEE provisions since 1999
Covered entities
Any company that professionally imports or manufactures packaging, packaged products, EEE, batteries or vehicles for the Norwegian market; from July 2025 all packaging producers regardless of volume. Also producers that first place certain single-use plastic products on the Norwegian market (food and beverage containers, cups, flexible food packaging, light carrier bags, wet wipes, tobacco filters, balloons) and producers of fishing, recreational fishing and aquaculture gear containing plastic.
Primary source ↗Verified 2026-09-23
In force; phased rollout of zero waste certification continues

Türkiye runs a national Zero Waste framework that pairs source separation rules for institutions with producer responsibility duties for packaging and electrical equipment, all administered by the Ministry of Environment, Urbanisation and Climate Change. Packaging producers must register in the zero waste information system, hit recovery targets and pay deposits or fees set under the Packaging Waste Control Regulation.

Enforcement
Mandatory
Effective date
Zero Waste Regulation effective 12 July 2019, amended 9 October 2021; Packaging Waste Control Regulation effective 26 June 2021
Covered entities
Public institutions, large commercial premises, packaging producers and importers, EEE producers; building and premises operators required to set up zero waste systems on phased schedule in annexes
Primary source ↗Verified 2026-09-23
In force across all provinces with continuing transition to full producer-funded EPR

EPR in Canada is set province by province under the CCME action plan, with British Columbia, Ontario and Quebec running the most developed full producer-funded systems for packaging, paper, electronics, batteries and other product streams. Ottawa has no overarching federal EPR statute; CEPA underpins toxic-substances rules and federal coordination, while provinces operate the schemes through PROs such as Recycle BC, Circular Materials and Éco Entreprises Québec.

Enforcement
Mandatory
Effective date
BC packaging EPR since 19 May 2014; Ontario Blue Box transition to full producer responsibility ran 1 July 2023 to 31 December 2025; Quebec modernized packaging EPR effective 1 January 2025; Alberta packaging, paper and hazardous and special products EPR launched 1 April 2025 (remaining communities 1 October 2026); EEE, batteries, tires and paint schemes since the 2000s
Covered entities
Producers (brand owners, first importers, distributors) of packaging, printed paper, EEE, batteries, tyres, paint, lamps, used oil and other regulated products in each province; thresholds vary (e.g., Ontario small-producer exemption below CAD 2 million revenue or 1 tonne supplied)
Primary source ↗Verified 2026-09-23